Download HPE Campus Access Mobility Expert.HPE7-A07.ExamTopics.2026-10-13.18q.vcex

Vendor: HP
Exam Code: HPE7-A07
Exam Name: HPE Campus Access Mobility Expert
Date: Oct 13, 2026
File Size: 3 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: TAURUSSIM_20OFF

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
A university owns a campus with several buildings segmented into east and west wings, which are L3 separated. The east wing has 1600 APs, and the west wing has 1200 APs. Each wing has a single gateway cluster managed by HPE Aruba Networking Central. Each cluster contains one 7210 mobility gateway. The gateways are configured with DHCP relay and route all client VLANs. A new business-critical faculty real-time application requires users to roam within wings but not across wings without disconnections or delay increments.
Which changes must the network administrator make to successfully meet the requirement without performance degradation matching best practices? (Choose two.)
  1. Remove the DHCP relay from the gateways and enable the DHCP server instead
  2. Replace the 7210 mobility gateway in the east wing with a pair of 9012 mobility gateways.
  3. Run L2 for all SSIDs and permit the users’ VLANs in the gateway's uplinks.
  4. Add a single 7210 mobility gateway to each cluster.
  5. Replace the 7210 mobility gateway in the west wing with a pair of 7030 mobility gateways.
Correct answer: B, C
Question 2
Which command would allow you to verify receipt of a CoA message on an AOS-10 GW?
  1. diag utilities tcpdump host-port 3799
  2. packet-capture datapath udp 3799
  3. packet-capture controlpath udp 3799
  4. tcpdump host-port 3799
Correct answer: B
Question 3
An ACME company employee complained about a recent poor-quality VoIP call while moving around their office environment. HPE Aruba Networking Central reported a fair UCC score for this call while your VoIP engineer reported that their systems reported a MOS of 2.3. The VoIP devices are operating over the 5GHz frequency band.
What are the possible contributing factors? (Choose two.)
  1. Design issues related to 802.11e.
  2. There was localized interference at the caller’s location.
  3. HPE Aruba Networking AirMatch over-the-air updates are disabled.
  4. Design factors related to 802.11h.
  5. 802.1r is enabled in the WLAN Security settings.
Correct answer: A, B
Question 4
A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attributes:
MAC address = 81:cd:93:13:ab:31 -
LLDP sys-desc = iotcontroller -
The test device is being assigned to the "iot-dev" role. However, the customer requires the "iot-prod" role be applied.
Given the configuration, what is causing the "iot-dev" role to be applied to the device?
  1. An external RADIUS server is unreachable.
  2. The device-profile precedence order is not configured.
  3. The LLDP system description matches the lldp-group configuration.
  4. The test device does not support CDP
Correct answer: C
Question 5
A customer reports that their HPE Aruba Networking ClearPass Guest captive portal is not functioning. The page loads but they are unable to browse after pressing connect. They have uploaded a valid and publicly trusted *.aruba-training.com certificate.
Refer to the exhibit.
Which would explain this issue?
  1. *.aruba-training.com needs to be entered in the Address field for the ClearPass Guest.
  2. HTTPS certificate is not required in ClearPass Guest
  3. HTTPS wildcard certificates are not supported.
  4. captiveportal-login.aruba-training.com needs to be entered in the Address field for the ClearPass Guest
Correct answer: A
Question 6
You configured a bridged mode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates, HPE Aruba Networking ClearPass shows the following error:
What is needed to resolve this issue?
  1. Modify your ACX-AD authentication source to include the UPN in the search.
  2. Recreate the SSID in tunneled mode.
  3. Enable authorization in your Authentication Method.
  4. Configure ClearPass to trust the client certificate.
Correct answer: A
Question 7
Refer to the exhibits.
Which statement is true given the following CLI output from a CX 6300?
  1. There are no active fabric clients on the CX switch with RD 172.16.10.1.
  2. A wired client with IP address 10.203.1.100 has a host route that is not being properly advertised.
  3. The overlay loopback addresses are advertised in the fabric with 24-bit subnet masks.
  4. A wired client with IP address 10.203.1.100 is on a remote CX 6300 in the fabric with loopback IP address 172.21.11.2.
Correct answer: D
Question 8
You are deploying a new AOS-10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicating using port 443 to any URLs except for *.central.arubanetworks.com.
How would you onboard these gateways successfully into HPE Aruba Networking Central?
  1. Choose Static Activate and Configure:
    • system name
    • switch role
    • ACP FQDN address
    • uplink port information
    • IP address and default gateway
    • DNS IP address
    • controller country code
    • timezone and clock
    • admin password
  2. Choose Full Setup and Configure:
    • system name
    • switch role
    • ACP FODN address
    • uplink port information
    • IP address and default gateway
    • DNS IP address
    • controller country code
    • timezone and clock
    • admin password
  3. Choose Static Activate and Configure-
    • controller VLAN
    • uplink port information
    • IP address
    • default gateway
    • DNS IP address
  4. Choose Full Setup and Configure:
    • controller VLAN
    • uplink port information
    • IP address and default gateway
    • DNS IP address
Correct answer: A
Question 9
A customer with a gateway connected to a device on gigabitethernet 0/0/3 configures an Asset ID TLV on the device for inventory management.
Refer to the exhibit.
The customer mentions the Asset ID is not shown. What is causing the issue?
  1. LLDP TX is not enabled
  2. LLPD-MED needs to be enabled
  3. MTU size is too small.
  4. Unknown TLVs cannot be displayed
Correct answer: A
Question 10
A BGP routing table contains multiple routes to the same destination prefix.
Referring to the table below, which route would be marked with a ">" symbol?
  1. A
  2. B
  3. C
  4. D
  5. E
Correct answer: E
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!